Yellow G11 Epgc203 Insulation Materials/g11 glass fiber reinfored sheet
Tlhaloso ea Sehlahisoa
Sehlahisoa sena se entsoe ka lesela la fiber ea khalase e se nang alkali e le thepa e tšehetsang, e nang le resin e phahameng ea TG epoxy e le binder ka ho hatella ho chesang ho laminated tlas'a mocheso oa 155 °. thepa ea motlakase tlas'a tikoloho e omeletseng le e metsi, e ka sebelisoa tikolohong e mongobo le oli ea transformer.Ke ea grade F mocheso resistance insulating material.The technical data is like to FR5, but is not fire retardant.
Ho Ikamahanya le Melao-motheo
TS EN 60893-3-2-2009 IEC 60893-3-2-2009 lisebelisoa tsa insulating tsa motlakase oa thermosetting resin - Karolo ea 4: Li-laminate tse thata tsa epoxy resin - Karolo ea 3-2 ea lisebelisoa tsa motho ka mong Setšoantšo sa EPGC203.
Likaroloana
1.Botsitso bo phahameng ba motlakase tlas'a mongobo o phahameng;
2.Excellent thepa thepa;
3.Matla a phahameng a mochine tlas'a mocheso o phahameng;
4.Ho hanyetsana le mongobo o phahameng;
5.Ho hanyetsa mocheso o phahameng;
6. Ho hanyetsa mocheso: Kereiti ea F
Kopo
E sebetsa ho mefuta eohle ea makoloi, motlakase, elektroniki le masimo a mang, a sebelisoang haholo ho enjene, lisebelisoa tsa motlakase joalo ka likarolo tsa sebopeho sa insulation, switchgear e phahameng ea voltage, switch e phahameng ea motlakase (joalo ka lisebelisoa tsa motlakase tsa stator pheletsong ka bobeli, sekhechana sa rotor end plate rotor flange. , slot wedge, wiring plate, joalo-joalo).
Index ea Ts'ebetso e ka Sehloohong
| NO. | ITEM | THUTO | INDEX BOHLOKO | ||
| 1 | Botenya | g/cm³ | 1.8-2.0 | ||
| 2 | Sekhahla sa ho monya metsi | % | ≤0.5 | ||
| 3 | Matla a ho kobeha a otlolohileng | Tloaelehileng | MPa | ≥380 | |
| 155±2℃ | ≥190 | ||||
| 4 | Matla a ho hatella | E otlolohileng | MPa | ≥300 | |
| Bapisa | ≥200 | ||||
| 5 | Matla a amang (mofuta oa charpy) | Lengthway ha ho lekhalo | KJ/m² | ≥147 | |
| 6 | Matla a tlamahano | N | ≥6800 | ||
| 7 | Matla a tšepe | Lengthway | MPa | ≥300 | |
| E tshekaletseng | ≥240 | ||||
| 8 | Matla a motlakase a otlolohileng (ka oli ea 90 ℃ ± 2 ℃) | 1mm | KV/mm | ≥14.2 | |
| 2mm | ≥11.8 | ||||
| 3mm | ≥10.2 | ||||
| 9 | Matla a ho senya a tšoanang (1 min ka oli ea 90 ℃ ± 2 ℃) | KV | ≥40 | ||
| 10 | Dielectric dissiption factor (50Hz) | - | ≤0.04 | ||
| 11 | Khanyetso ea Insulation | Tloaelehileng | Ω | ≥1.0×1012 | |
| Ka mor'a ho koloba ka lihora tse 24 | ≥1.0×1010 | ||||
