China phenolic epoxy laminate boto mofuta EPGC201/3240 mosehla
Tlhaloso ea Sehlahisoa
Phenolic epoxy glass lesela laminated lakane mofuta EPGC201/3240:Sehlahisoa sena ke sehlahisoa sa laminated se entsoeng ka lesela la khalase le se nang motlakase la alkali le kentsoeng ka epoxy phenolic resin ka ho tobetsa ho chesang.Thermostablity ke grade B. E na le thepa e ntle ea mechine le ea dielectrical.,
E sebetsa libakeng tsa mechini, tsa motlakase, tsa elektroniki, tsa motlakase le tse ling.E boetse e sebelisoa ha ho sebetsoa likarolo tsa insulating, 'me e sebetsoa ka mefuta eohle ea likarolo tsa insulating le lisebelisoa tse sireletsang likarolo tsa sebopeho, tse ka sebelisoang maemong a mongobo a tikoloho le oli ea transfoma.
Ho Ikamahanya le Melao-motheo
TS EN 60893-3-2-2009 IEC 60893-3-2-2009 lisebelisoa tsa insulating tsa motlakase oa thermosetting resin - Karolo ea 4: Li-laminate tse thata tsa epoxy resin - Karolo ea 3-2 ea lisebelisoa tsa motho ka mong lintlha tse qaqileng EPGC201.
Likaroloana
1.Lintho tse ntle tsa mochini;
2.Lintho tse ntle tsa dielectrical;
3.Ho hanyetsa mongobo, ho loketse tlas'a
tikoloho e metsi le oli ea transformer.
4.Good machinability thepa
5.Ho hanyetsa mocheso: Kereiti ea B
Kopo
1) E sebelisoa ho litlhoko tsa ts'ebetso ea mochini oa enjene e phahameng, lisebelisoa tsa motlakase le likarolo tsa sebopeho sa insulate
2) ICT, ITE e laola ts'ebetso ea likarolo tsa ho kenya letsoho, lisebelisoa tsa liteko, li-keypads tsa silicon
3) poleiti ea ho lokisa, plywood ea hlobo, li-countertops grinding plate, mechini ea ho paka, kama, joalo-joalo.
Index ea Ts'ebetso e ka Sehloohong
| NO. | ITEM | THUTO | INDEX BOHLOKO | ||
| 1 | Botenya | g/cm³ | 1.8-2.0 | ||
| 2 | Sekhahla sa ho monya metsi | % | ≤0.5 | ||
| 3 | Matla a ho kobeha a otlolohileng | MPa | ≥340 | ||
| 4 | Matla a kgatello a emeng | MPa | ≥350 | ||
| 5 | Matla a ts'usumetso e ts'oanang (mofuta oa charpy-gap) | KJ/m² | ≥33 | ||
| 6 | Matla a matla a tšoanang (mokhoa oa beam ea cantilever) | KJ/m² | ≥34 | ||
| 7 | Matla a ho kuta a tšoanang | Mpa | ≥30 | ||
| 8 | Matla a tšepe | MPa | ≥200 | ||
| 9 | Matla a motlakase a otlolohileng (ka oli ea 90 ℃ ± 2 ℃) | 1mm | KV/mm | ≥14.2 | |
| 2mm | ≥11.8 | ||||
| 3mm | ≥10.2 | ||||
| 10 | Matla a ho senya a tšoanang (ka oli ea 90 ℃ ± 2 ℃) | KV | ≥35 | ||
| 11 | Dielectric dissiption factor (50Hz) | - | ≤0.04 | ||
| 12 | Khanyetso ea Insulation | Tloaelehileng | Ω | ≥5.0×1012 | |
| Ka mor'a ho koloba ka lihora tse 24 | ≥5.0×1010 | ||||
