FR5 Hard Epoxy Glassfiber Laminated Sheet
Tlhaloso ea Sehlahisoa
Sehlahisoa sena se entsoe ka laminated ke mocheso o phahameng le khatello e phahameng le setsebi sa motlakase se sebelisoang ka lesela la alkali le sa lefelloeng la khalase le kentsoeng ka resin e khethehileng ea epoxy, ke ea grade F mocheso o thibelang mocheso oa thepa. .E loketse ho sebelisoa ka mechine, motlakase le elektronike e le lisebelisoa tse phahameng tsa ho kenya letsoho.E na le matla a phahameng a mochine, matla a mochine oa mocheso oa mocheso, ho hanyetsa mollo, ho hanyetsa mocheso le ho hanyetsa mongobo.
Ho Ikamahanya le Melao-motheo
TS EN 60893-3-2-2009 IEC 60893-3-2-2009 lisebelisoa tsa insulating tsa motlakase oa thermosetting resin - Karolo ea 4: Li-laminate tse thata tsa epoxy resin - Karolo ea 3-2 ea lisebelisoa tsa motho ka mong Setšoantšo sa EPGC204.
Likaroloana
1.Thepa e phahameng ea mechine tlas'a mocheso oa bohareng;
2.Botsitso bo botle ba motlakase tlas'a mocheso o phahameng;
3.Matla a phahameng a Mechanical
4.Matla a phahameng a mochine tlas'a mocheso o phahameng;
5.Ho hanyetsa mocheso o phahameng;
6.Ho hanyetsa mongobo o phahameng;
7.Good machinability;
8.Ho hanyetsa mocheso: Kereiti ea F;
9.Thepa e thibelang mollo: UL94 V-0
Kopo
E sebelisoa bakeng sa lisebelisoa tsa mochini, tsa motlakase, tsa motlakase e le lisebelisoa tsa ho kenya letsoho, 'me li sebelisoa sebakeng sa oli ea transfoma le tikolohong e metsi.
FR5 ha e bapisoa le FR4, TG e holimo, thermostablity ke grade F (155 degree), FR5 ea rona e fetile teko ea EN45545-2:2013+A1:2015: Likopo tsa terene - Tšireletso ea mollo ea likoloi tsa terene-Karolo ea2: Tlhokahalo bakeng sa boitsoaro ba mollo oa thepa le likaroloana.le ho amoheloa keCRRC,re qala ho fana ka FR5 hoCRRCho tloha 2020. Haeba u na le lipotso ka kopo ikopanye le rona.
Index ea Ts'ebetso e ka Sehloohong
| NO. | ITEM | THUTO | INDEX BOHLOKO | ||
| 1 | Botenya | g/cm³ | 1.8-2.0 | ||
| 2 | Sekhahla sa ho monya metsi | % | ≤0.5 | ||
| 3 | Matla a ho kobeha a otlolohileng | Tloaelehileng | MPa | ≥380 | |
| 155±2℃ | ≥190 | ||||
| 4 | Matla a ho hatella | E otlolohileng | MPa | ≥350 | |
| Bapisa | ≥260 | ||||
| 5 | Matla a amang (mofuta oa charpy) | Lengthway ha ho lekhalo | KJ/m² | ≥147 | |
| 6 | Matla a tlamahano | N | ≥6800 | ||
| 7 | Matla a tšepe | Lengthway | MPa | ≥320 | |
| E tshekaletseng | ≥240 | ||||
| 8 | Matla a motlakase a otlolohileng (ka oli ea 90 ℃ ± 2 ℃) | 1mm | KV/mm | ≥14.2 | |
| 2mm | ≥11.8 | ||||
| 3mm | ≥10.2 | ||||
| 9 | Matla a ho senya a tšoanang (1 min ka oli ea 90 ℃ ± 2 ℃) | KV | ≥40 | ||
| 10 | Dielectric dissiption factor (50Hz) | - | ≤0.04 | ||
| 11 | Khanyetso ea Insulation | Tloaelehileng | Ω | ≥1.0×1012 | |
| Ka mor'a ho koloba ka lihora tse 24 | ≥1.0×1010 | ||||
| 12 | Combustibility (UL-94) | Boemo | V-0 | ||
