OEM / ODM Manufacturer Resin Slot Wedge
Sepheo sa rona le koporasi e lokela ho ba "Kamehla re khotsofatsa litlhoko tsa bareki".Re tsoela pele ho haha, setaele le ho rala lintho tsa boleng bo holimo bakeng sa bareki ba rona ba khale le ba bacha, 'me re fihlela tebello ea ho hapa katleho bakeng sa bareki ba rona ka nako e ts'oanang le rona bakeng sa OEM/ODM Manufacturer Resin Slot Wedge, Hajoale re ntse re batla. pele ho ts'ebelisano e ntle le ho feta le bareki ba mose ho maoatle ho ipapisitse le melemo e kopaneng.U lokela ho ikutloa u lokolohile ho ikopanya le rona bakeng sa lintlha tse ling.
Sepheo sa rona le koporasi e lokela ho ba "Kamehla re khotsofatsa litlhoko tsa bareki".Re tsoela pele ho aha le ho etsa setaele le ho rala lintho tsa boleng bo holimo bakeng sa bareki ba rona ba khale le ba bacha, 'me re fihlela tebello ea win-win bakeng sa bareki ba rona ka nako e ts'oanang le rona.China Epoxy Slot Wedges le Stator Wedging, Ka boleng bo botle, theko e utloahalang le tšebeletso e tiileng, re thabela botumo bo botle.Lihlahisoa li romeloa Amerika Boroa, Australia, Asia Boroa-bochabela joalo-joalo.Amohela ka mofuthu bareki ba hae le kantle ho naha ho sebelisana le rona bakeng sa bokamoso bo khanyang.
Tlhaloso ea Sehlahisoa
Sehlahisoa sena ke sehlahisoa sa laminated se entsoeng ka lesela la khalase le sa sebetseng la alkali, ka ho tobetsa ka mocheso o phahameng oa Tg epoxy resin joalo ka binder. mongobo.Thermostability ke grade F, e loketse mefuta eohle ea motlakase, lisebelisoa tsa motlakase, tsa elektroniki le tse ling.
Likaroloana
1.Botsitso bo botle ba motlakase tlas'a mongobo o phahameng;
2.Matla a phahameng a mochini tlas'a mocheso o phahameng,
sekhahla sa ho boloka matla a mochini ≥50% tlasa 180 ℃;
3.Ho hanyetsa mongobo;
4.Ho hanyetsa mocheso;
5.Ho hanyetsa mocheso: Kereiti ea H
Index ea Ts'ebetso e ka Sehloohong
Ho ea ka GB/T 1303.4-2009 motlakase oa thermosetting resin laminates hard laminates - Karolo ea 4: epoxy resin hard laminates.
Ponahalo: bokaholimo bo lokela ho ba bo bataletseng, bo se na li-bubble, likoting le masoba, empa liphoso tse ling tse sa amang ts'ebeliso li lumelletsoe, joalo ka: mengoapo, indentation, matheba le matheba a seng makae. sefahleho sa ho qetela se ke ke sa senyeha le ho phunyeha.
Kopo
E loketse mefuta eohle ea enjene, lisebelisoa tsa motlakase, tsa elektroniki le tse ling.
Index ea Ts'ebetso e ka Sehloohong
| NO. | ITEM | THUTO | INDEX BOHLOKO | |||
| 1 | Botenya | g/cm³ | 1.8-2.0 | |||
| 2 | Sekhahla sa ho monya metsi | % | ≤0.5 | |||
| 3 | Matla a ho kobeha a otlolohileng | Tloaelehileng | Lengthway | MPa | ≥450 | |
| E tshekaletseng | ≥380 | |||||
| 180±5℃ | Lengthway | ≥250 | ||||
| E tshekaletseng | ≥190 | |||||
| 4 | Matla a amang (mofuta oa charpy) | Ha ho lekhalo | Lengthway | KJ/m² | ≥180 | |
| E tshekaletseng | ≥137 | |||||
| 5 | Matla a ho hatella | Lengthway | MPa | ≥500 | ||
| E tshekaletseng | ≥250 | |||||
| 6 | Matla a tšepe | Lengthway | MPa | ≥320 | ||
| E tshekaletseng | ≥300 | |||||
| 7 | Matla a motlakase a otlolohileng (ka oli ea 90 ℃ ± 2 ℃) | 1mm | KV/mm | ≥17.0 | ||
| 2mm | ≥14.9 | |||||
| 3mm | ≥13.8 | |||||
| 8 | Matla a ho senya a tšoanang (1 min ka oli ea 90 ℃ ± 2 ℃) | KV | ≥40 | |||
| 9 | Dielectric dissiption factor (50Hz) | - | ≤0.04 | |||
| 10 | Parrallel Insulation Resistance | Tloaelehileng | Ω | ≥1.0×1012 | ||
| Ka mor'a ho koloba ka lihora tse 24 | ≥1.0×1010 | |||||
Sepheo sa rona le koporasi e lokela ho ba "Kamehla re khotsofatsa litlhoko tsa bareki".Re tsoela pele ho haha, setaele le ho rala lintho tsa boleng bo holimo bakeng sa bareki ba rona ba khale le ba bacha, 'me re fihlela tebello ea ho hapa katleho bakeng sa bareki ba rona ka nako e ts'oanang le rona bakeng sa OEM/ODM Manufacturer Resin Slot Wedge, Hajoale re ntse re batla. pele ho ts'ebelisano e ntle le ho feta le bareki ba mose ho maoatle ho ipapisitse le melemo e kopaneng.U lokela ho ikutloa u lokolohile ho ikopanya le rona bakeng sa lintlha tse ling.
Moetsi oa OEM / ODMChina Epoxy Slot Wedges le Stator Wedging, Ka boleng bo botle, theko e utloahalang le tšebeletso e tiileng, re thabela botumo bo botle.Lihlahisoa li romeloa Amerika Boroa, Australia, Asia Boroa-bochabela joalo-joalo.Amohela ka mofuthu bareki ba hae le kantle ho naha ho sebelisana le rona bakeng sa bokamoso bo khanyang.
