Halogen mahala FR5 Epoxy Fiberglass Laminated Sheet(EPGC311)
Tataiso ea Sehlahisoa
Halogen mahala FR5 e ts'oanang le FR5, empa e na le motsoako oa mahala oa Halogen. Sehlahisoa sena se ne se le laminated ke mocheso o phahameng le khatello e phahameng le setsebi sa motlakase se sebelisitsoeng ka alkali mahala khalase lesela la fiber le kenngoeng ka lesela le khethehileng la epoxy, ke la grade F mocheso o hanyetsanang le lisebelisoa tsa mocheso. E na le thepa e phahameng ea mochine tlas'a mocheso o bohareng, le ts'ebetso e tsitsitseng ea motlakase tlas'a mocheso o phahameng. e loketse mebaraka e sa lefelloeng ea halogen.
Ho lumellana le litekanyetso
Ho ea ka GB/T 1303.4-2009 thermosetting resin industry hard laminates - Karolo ea 4: epoxy resin hard laminates, IEC 60893-3-2-2011 insulating thepa - thermosetting resin industrial hard laminates - Karolo ea 3-2 ea litlhaloso tsa motho ka mong EPGC204.
Kopo
E sebelisoa bakeng sa lisebelisoa tsa mochini, tsa motlakase, tsa motlakase e le lisebelisoa tsa ho kenya letsoho, 'me li sebelisoa sebakeng sa oli ea transfoma le tikolohong e metsi.
Litšoantšo tsa lihlahisoa
Letsatsi le ka Sehloohong la Tekheniki(Tobetsa mona ho khoasolla tlaleho ea tlhahlobo ea motho oa boraro)
| Ntho | Thepa | Yuniti | Boleng bo Tloaelehileng | Boleng bo Tlwaelehileng | Mokhoa oa Teko | |
| 1 | Flexural matla perpendicular ho laminations | MPa | ≥340 | 525 | GB/T 1303.2 | |
| 2 | Flexural matla perpendicular to laminations (155 ℃±2℃) | MPa | ≥170 | 314 |
| |
| 3 | Matla a tšepe | MPa | ≥300 | 381 |
| |
| 4 | Matla a matla a Charpy a tsamaisana le laminations (Notched) | kJ/m2 | ≥33 | 78 |
| |
| 5 | Matla a motlakase a perpendicular ho laminations (ho 90 ℃ ± 2 ℃ ka oli), 1mm ka botenya | kV/mm | ≥14.2 | 17.2 |
| |
| 6 | Motlakase oa ho senyeha o bapa le laminations (ho 90 ℃ ± 2 ℃ ka oli) | kV | ≥30 | ≥50 |
| |
| 7 | Ho hanyetsa insulation (kamora ho qoelisoa ka metsing lihora tse 24) | MΩ | ≥5.0×104 | 4.2×106 |
| |
| 8 | Tumello e Lekanyelitsoeng(50Hz) | - | ≤5.5 | 4.9 |
| |
| 9 | Ho monya metsi, 3mm ka botenya | mg | ≤22 | 17 |
| |
| 10 | Botenya | g/cm3 | 1.90–2.1 | 1.99 |
| |
| 11 | Ho chesa (Mokhoa o otlolohileng) |
| 级 | V-0 | V-0 |
|
| 12 | Index ea mocheso | ℃ | _ | 155 ℃ |
| |
| 13 | TG | ℃ | _ | 170℃±5℃ | ||
LBH
Q1: Na u khoebo ea k'hamphani kapa moetsi?
Re baetsi ba ka sehloohong ba motsoako oa motlakase oa motlakase, re 'nile ra kopanela ho moetsi oa thermoset rigid composite ho tloha 2003.Boemo ba rona ke 6000TONS / selemo.
Q2: Mehlala
Mehlala ke mahala, o hloka feela ho lefella tefiso ea ho tsamaisa thepa.
Q3: U tiisa joang boleng ba tlhahiso ea bongata?
Bakeng sa ponahalo, boholo le botenya: re tla etsa tlhahlobo e felletseng pele re paka.
Bakeng sa boleng ba ts'ebetso: Re sebelisa foromo e tsitsitseng, 'me e tla ba tlhahlobo ea kamehla ea lisampole, re ka fana ka tlaleho ea tlhahlobo ea sehlahisoa pele re romelloa.
Q4: Nako ea ho fana
E itšetlehile ka palo ea taelo.Ka kakaretso, nako ea ho fana e tla ba matsatsi a 15-20.
Q5: Sephutheloana
Re tla sebelisa pampiri ea matsoho ho paka holim'a plywood pallet.haeba u na le litlhoko tse khethehileng tsa sephutheloana, re tla paka joalo ka tlhoko ea hau.
Q6: Tefo
TT, 30% T/T esale pele ,ho leka-lekana pele ho romelloa.Re boetse re amohela L/C.
