GPO-3 UNSATURATED POLYESTER GLASS MAT SHEET(UPGM203)
Tataiso ea Sehlahisoa
UPGM203/GPO-3 ke khalase e matlafalitsoeng ka thermoset polyester sheet.GPO-3 e matla, e sataletse, e tsitsitse ka mokhoa o itseng, 'me ha e na tšusumetso.Thepa e boetse e na le lisebelisoa tse ntle tsa motlakase tse kenyelletsang lelakabe, arc le ho hanyetsa pina.E sebelisoa haholo bakeng sa lisebelisoa tsa motlakase tsa motlakase
Ho lumellana le litekanyetso
IEC 60893-3-5:2003
Kopo
Tšebeliso ea eona e tloaelehileng haholo ke ho tšehetsa le ho arola ka motlakase lisebelisoa tsa motlakase le tsa kabo ea motlakase.Lisebelisoa tsa GPO-3 li kenyelletsa litšehetso tsa libese le liphanele tse ntseng li hola le li-insulator tsa lisebelisoa tse matla haholo.
Litšoantšo tsa lihlahisoa
Letsatsi le ka Sehloohong la Tekheniki(Tobetsa mona ho khoasolla tlaleho ea tlhahlobo ea motho oa boraro)
| Ntho | HLAHLOBO NTHO | THUTO | TEKO MOKHOA | BOHLOKOA MAEMO | SEphetho TEKO |
| 1 | Flexural matla perpendicular ho laminations E-1/130: Tlas'a 130±2℃ | MPa | ISO178 | ≥130 | 205 |
| 2 | Matla a amang a tsamaisanang le lamination (Izod, notched) | kJ/m2 | ISO 180 | ≥35 | 56 |
| 3 | Matla a motlakase a perpendicular ho laminations (ka oli, 90 ± 2 ℃), 2 mm ka botenya | kV/mm | IEC 60243 | ≥10.5 | 12.5 |
| 4 | Matla a matla a motlakase a laminar (90±2°C oli), botenya ba poleiti 2 mm | ||||
| 5
| Li-voltage tse senyehang li tsamaisana le laminations (ka oli, 90±2℃) | kV | IEC 60243 | ≥35 | 80 |
| 6 | Ho monya metsi (4 mm ka botenya) | mg | ISO 62 | ≤63 | 31 |
| 7 | Insulation resistance ka mor'a ho qoelisoa metsing ka lihora tse 24, D-24/23 | MΩ | IEC 60167 | ≥5.0×102 | 6.5×105 |
| 8 | Lenane la ho latedisa ka ho bapisa (CTI) | V | Tlhaloso ea IEC 60112 | ≥500 | 600 |
| 9 | Tracking le khoholeho ea mobu khanyetso | Sehlopha | IEC 60587 | 1B 2.5 | Feta |
| 10 | Botenya | g/cm3 | ISO 1183 | 1.70-1,90 | 1.86 |
| 11 | Ho chesa | Sehlopha | IEC 60695 | V0 | V0 |
| 12 | Matla a hatellang a perpendicular ho laminations | MPa | ISO 604 |
| 300 |
| 13 | Matla a tšepe | MPa | ISO 527 |
| 85 |
| 14 | Arc khanyetso | s | Tlhaloso ea IEC 61621 |
| 180 |
| 15 | Mamello ea mocheso | TI | IEC 60216 |
| 130 |
LBH
Q1: Na u khoebo ea k'hamphani kapa moetsi?
Re baetsi ba ka sehloohong ba motsoako oa motlakase oa motlakase, re 'nile ra kopanela ho moetsi oa thermoset rigid composite ho tloha 2003.Boemo ba rona ke 6000TONS / selemo.
Q2: Mehlala
Mehlala ke mahala, o hloka feela ho lefella tefiso ea ho tsamaisa thepa.
Q3: U tiisa joang boleng ba tlhahiso ea bongata?
Bakeng sa ponahalo, boholo le botenya: re tla etsa tlhahlobo e felletseng pele re paka.
Bakeng sa boleng ba ts'ebetso: Re sebelisa foromo e tsitsitseng, 'me e tla ba tlhahlobo ea kamehla ea lisampole, re ka fana ka tlaleho ea tlhahlobo ea sehlahisoa pele re romelloa.
Q4: Nako ea ho fana
E itšetlehile ka palo ea taelo.Ka kakaretso, nako ea ho fana e tla ba matsatsi a 15-20.
Q5: Sephutheloana
Re tla sebelisa pampiri e entsoeng ka matsoho ho paka holim'a plywood pallet.haeba u na le litlhoko tse khethehileng tsa sephutheloana, re tla paka joalo ka tlhoko ea hau.
Q6: Tefo
TT, 30% T/T esale pele ,ho leka-lekana pele ho romelloa.Re boetse re amohela L/C.