G10 Halogen-free fire retardant Epoxy glass fiber laminated sheet
Tlhaloso ea Sehlahisoa
G10 Epoxy glass fiber laminated sheet (Tlwaelehileng):Sehlahisoa sena se ne se le laminated ke mocheso o phahameng le khatello e phahameng ka lesela la khalase ea elektronike le kenngoeng ka epoxy resin. Ka thepa e phahameng ea mochine le dielectric, mocheso o motle le ho hanyetsa maqhubu, hape ka machinability e ntle; Sehlahisoa sena se ka kopana le maemo a EU ROHS, ke thomelontle ka bophara ho Aisa boroa-bochabela, Europe, India, joalo-joalo.Ntho ea bohlokoa le ho feta ke hore laminate ena ea G10 ha e na Halogen ebile e thibela mollo, e leng botsoalle ba tikoloho 'me e ka amoheloa ke limmaraka tsa Europe le Amerika.
G10 ha se lebitso la lintho tse bonahalang, empa ke boemo ba lintho tse bonahalang, lebitso G10 le tsoa tsamaisong ea boemo ba NEMA moo litekanyetso tsa "G" tsa "Glass fiber base"
Ho lumellana le maemo:
TS EN 60893-3-2-2009 IEC 60893-3-2-2009 lisebelisoa tsa insulating tsa motlakase oa thermosetting resin - Karolo ea 4: Li-laminate tse thata tsa epoxy resin - Karolo ea 3-2 ea lisebelisoa tsa motho ka mong lintlha tse qaqileng EPGC201.
Likaroloana
1.Thepa e phahameng ea mechine;
2.Thepa e phahameng ea dielectric;
3.Ho hanyetsa mongobo hantle;
4.Ho hanyetsa mocheso o motle;
5.Good machinability;
6.Ho hanyetsa mocheso: Kereiti ea B
7.Halogen-mahala le mollo retardant
Index ea Ts'ebetso e ka Sehloohong
E loketse bakeng sa ts'ebeliso ea litlhoko tse phahameng tsa lisebelisoa tsa elektronike tsa lihlahisoa, tse kang FPC reinforcement plate, PCB drilling pad, fiberglass meson, glass fiber board potentiometer carbon film printing, precision tour stars gear grinding (chip), poleiti ea tlhahlobo e nepahetseng, motlakase (motlakase) Lisebelisoa tsa ho kenya li-clapboard, plate ea insulating, boto ea ho kenya li-transformer, likarolo tsa motlakase, lebili la ho sila, boto ea elektroniki, joalo-joalo.
Index ea Ts'ebetso e ka Sehloohong
| NO. | ITEM | THUTO | INDEX BOHLOKO | ||
| 1 | Botenya | g/cm³ | 1.8-2.0 | ||
| 2 | Sekhahla sa ho monya metsi | % | ≤0.5 | ||
| 3 | Matla a ho kobeha a otlolohileng | MPa | ≥340 | ||
| 4 | Matla a kgatello a emeng | MPa | ≥350 | ||
| 5 | Matla a ts'usumetso e ts'oanang (mofuta oa charpy-gap) | KJ/m² | ≥37 | ||
| 6 | Matla a ho kuta a tšoanang | Mpa | ≥34 | ||
| 7 | Matla a tšepe | MPa | ≥300 | ||
| 8 | Matla a motlakase a otlolohileng (ka oli ea 90 ℃ ± 2 ℃) | 1mm | KV/mm | ≥14.2 | |
| 2mm | ≥11.8 | ||||
| 3mm | ≥10.2 | ||||
| 9 | Matla a ho senya a tšoanang (ka oli ea 90 ℃ ± 2 ℃) | KV | ≥40 | ||
| 10 | Dielectric dissiption factor (50Hz) | - | ≤0.04 | ||
| 11 | Khanyetso ea Insulation | Tloaelehileng | Ω | ≥5.0×1012 | |
| Ka mor'a ho koloba ka lihora tse 24 | ≥5.0×1010 | ||||
| 12 | Combustibility (UL-94) | Boemo | V-0 | ||
