Lihlahisoa

Factory Cheap Hot China 1mm Glass Fiber FRP Fiberglass Flat Sheet in Roll

Tlhaloso e Khutšoanyane:


  • Botenya:0.3mm-80mm
  • Boemo:1020*2020mm 1220*2040mm 1220*2440mm
  • Mmala:Yellow (mebala e meng e ka etsoa ka mokhoa o ikhethileng)
  • Boikemisetso:Ts'ebetso e thehiloeng ho Litšoantšo
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    Re fana ka matla a maholo ho boleng le nts'etsopele, thekiso, thekiso le papatso le ts'ebetso ea Factory Cheap Hot China 1mm Glass Fiber FRP.Letlapa la Fiberglass Flatho Roll, sepheo sa rona ke ho thusa bareki ho utloisisa litabatabelo tsa bona kamehla.Re etsa boiteko bo matla ba ho fihlela maemo ana a ho hlola 'me re u amohela ka tieo hore u ingolise bakeng sa rona!
    Re fana ka matla a maholo ka boleng le nts'etsopele, thekiso, thekiso le mebaraka le ts'ebetso eaChina 1mm Glass Fibre Sheet, Letlapa la Fiberglass Flat, Re fihletse ISO9001 e fanang ka motheo o tiileng bakeng sa nts'etsopele ea rona e tsoelang pele.Ho phehella ho "Boleng bo Phahameng, Phano e Potlakileng, Theko e Hlolisanoang", joale re thehile tšebelisano ea nako e telele le bareki ba tsoang mose ho maoatle le ka hare ho naha mme re fumana maikutlo a phahameng a bareki ba bacha le ba khale.Ke tlotla ea rona e kholo ho fihlela litlhoko tsa hau.Re ntse re lebelletse tlhokomelo ea hau ka tieo.

    Tlhaloso ea Sehlahisoa

    3240 Epoxy phenolic glass fiber laminated sheet(Kereiti A):Sehlahisoa sena ke sehlahisoa sa laminated se entsoeng ka lesela la khalase le sa sebetseng la alkali le kentsoeng ka epoxy phenolic resin ka ho tobetsa hot.Thermostablity ke grade B. E na le thepa e ntle ea mochini le dielectrical,

    E sebetsa libakeng tsa mechini, tsa motlakase, tsa elektroniki, tsa motlakase le tse ling.E boetse e sebelisoa ha ho sebetsoa likarolo tsa insulating, 'me e sebetsoa ka mefuta eohle ea likarolo tsa insulating le lisebelisoa tse sireletsang likarolo tsa sebopeho, tse ka sebelisoang maemong a mongobo a tikoloho le oli ea transfoma.

     

    3240 Epoxy phenolic glass fiber laminated sheet(Kereiti ea B):Sehlahisoa sena ke sehlahisoa sa laminated se entsoeng ka lesela la khalase le se nang motlakase la alkali le kenngoeng ka epoxy phenolic resin ka ho tobetsa ho chesang.Hobane 3240-B e theko e tlaase ho feta 3240-A 'me e na le ts'ebetso e ntle, e tloaelehile haholo' marakeng.Ho fumana lintlha tse ling, ka kopo ikopanye le barekisi ba rona.

    Ho Ikamahanya le Melao-motheo

    TS EN 60893-3-2-2009 IEC 60893-3-2-2011 lisebelisoa tsa insulating tsa motlakase oa thermosetting resin - Karolo ea 4: Epoxy resin hard laminates lintlha tse qaqileng EPGC201.

    Likaroloana

    1.Lintho tse ntle tsa mochini;
    2.Lintho tse ntle tsa dielectrical;
    3.Ho hanyetsa mongobo, ho loketse tlas'a
    tikoloho e metsi le oli ea transformer.
    4.Good machinability thepa
    5.Ho hanyetsa mocheso: Kereiti ea B

    dasfdsf

    Kopo

    1) E sebelisoa ho litlhoko tsa ts'ebetso ea mochini oa enjene e phahameng, lisebelisoa tsa motlakase le likarolo tsa sebopeho sa insulate

    2) ICT, ITE e laola ts'ebetso ea likarolo tsa ho kenya letsoho, lisebelisoa tsa liteko, li-keypads tsa silicon

    3) poleiti ea ho lokisa, plywood ea hlobo, li-countertops grinding plate, mechini ea ho paka, kama, joalo-joalo.

    Index ea Ts'ebetso e ka Sehloohong

    NO. ITEM THUTO INDEX BOHLOKO
    1 Botenya g/cm³ 1.8-2.0
    2 Sekhahla sa ho monya metsi % ≤0.5
    3 Matla a ho kobeha a otlolohileng MPa ≥340
    4 Matla a kgatello a emeng MPa ≥350
    5 Matla a ts'usumetso e ts'oanang (mofuta oa charpy-gap) KJ/m² ≥33
    6 Matla a matla a tšoanang (mokhoa oa beam ea cantilever) KJ/m² ≥34
    7 Matla a ho kuta a tšoanang Mpa ≥30
    8 Matla a tšepe MPa ≥200
    9 Matla a motlakase a otlolohileng
    (ka oli ea 90 ℃ ± 2 ℃)
    1mm KV/mm ≥14.2
    2mm ≥11.8
    3mm ≥10.2
    10 Matla a ho senya a tšoanang (ka oli ea 90 ℃ ± 2 ℃) KV ≥35
    11 Dielectric dissiption factor (50Hz) - ≤0.04
    12 Khanyetso ea Insulation Tloaelehileng Ω ≥5.0×1012
    Ka mor'a ho koloba ka lihora tse 24 ≥5.0×1010

    Re fana ka matla a maholo ho boleng le nts'etsopele, thekiso, thekiso le papatso le ts'ebetso ea Factory Cheap Hot China 1mm Glass Fiber FRP.Letlapa la Fiberglass Flatho Roll, sepheo sa rona ke ho thusa bareki ho utloisisa litabatabelo tsa bona kamehla.Re etsa boiteko bo matla ba ho fihlela maemo ana a ho hlola 'me re u amohela ka tieo hore u ingolise bakeng sa rona!
    Factory Cheap HotChina 1mm Glass Fibre Sheet, Fiberglass Flat Sheet, Re fihletse ISO9001 e fanang ka motheo o tiileng bakeng sa nts'etsopele ea rona.Ho phehella ho "Boleng bo Phahameng, Phano e Potlakileng, Theko e Hlolisanoang", joale re thehile tšebelisano ea nako e telele le bareki ba tsoang mose ho maoatle le ka hare ho naha mme re fumana maikutlo a phahameng a bareki ba bacha le ba khale.Ke tlotla ea rona e kholo ho fihlela litlhoko tsa hau.Re ntse re lebelletse tlhokomelo ea hau ka tieo.


  • E fetileng:
  • E 'ngoe:

  • Lihlahisoa tse Amanang