3240 Halogen-free fire retardant Epoxy phenolic glass fiber laminated sheet
Tlhaloso ea Sehlahisoa
3240Sesebelisoa sa mollo se se nang halogenEpoxy phenolic glass fiber laminated sheet:Sehlahisoa sena ke sehlahisoa sa laminated se entsoeng ka lesela la khalase le se nang motlakase la alkali le kenngoeng ka epoxy phenolic resin ka ho tobetsa ho chesang.Thermostablity ke grade B. E na le thepa e ntle ea mechine le ea dielectrical, E sebetsa ho mechine, motlakase, elektroniki, motlakase le masimo a mang. .E boetse e sebelisoa ha ho sebetsoa likarolo tsa insulating, 'me e sebetsoa ka mefuta eohle ea likarolo tsa insulating le lisebelisoa tse sireletsang likarolo tsa sebopeho, tse ka sebelisoang maemong a mongobo a tikoloho le oli ea transfoma.
Ntho ea bohlokoa le ho feta ke hore laminate ena ea 3240 ha e na Halogen ebile e thibela mollo, e leng eco-friendly 'me e ka amoheloa ke limmaraka tsa Europe le Amerika.
Ho lumellana le maemo:
TS EN 60893-3-2-2009 IEC 60893-3-2-2009 lisebelisoa tsa insulating tsa motlakase oa thermosetting resin - Karolo ea 4: Li-laminate tse thata tsa epoxy resin - Karolo ea 3-2 ea lisebelisoa tsa motho ka mong lintlha tse qaqileng EPGC201.
Likaroloana
1.Lintho tse ntle tsa mochini;
2.Lintho tse ntle tsa dielectrical;
3.Ho hanyetsa mongobo, ho loketse tlas'a
tikoloho e metsi le oli ea transformer.
4.Good machinability thepa
5.Ho hanyetsa mocheso: Kereiti ea B
6.Halogen-mahala le mollo retardant
Kopo:
1) E sebelisoa ho latela litlhoko tsa ts'ebetso ea mochini oa enjene e phahameng, lisebelisoa tsa motlakase le likarolo tsa ral e sireletsang.
2) ICT, ITE e laola ts'ebetso ea likarolo tsa ho kenya letsoho, lisebelisoa tsa liteko, li-keypads tsa silicon
3) poleiti ea ho lokisa, plywood ea hlobo, li-countertops grinding plate, mechini ea ho paka, kama, joalo-joalo.
Index ea Ts'ebetso e ka Sehloohong
| NO. | ITEM | THUTO | INDEX BOHLOKO | ||
| 1 | Botenya | g/cm³ | 1.8-2.0 | ||
| 2 | Sekhahla sa ho monya metsi | % | ≤0.5 | ||
| 3 | Matla a ho kobeha a otlolohileng | MPa | ≥340 | ||
| 4 | Matla a kgatello a emeng | MPa | ≥350 | ||
| 5 | Matla a ts'usumetso e ts'oanang (mofuta oa charpy-gap) | KJ/m² | ≥33 | ||
| 6 | Matla a matla a tšoanang (mokhoa oa beam ea cantilever) | KJ/m² | ≥34 | ||
| 7 | Matla a ho kuta a tšoanang | Mpa | ≥30 | ||
| 8 | Matla a tšepe | MPa | ≥200 | ||
| 9 | Matla a motlakase a otlolohileng (ka oli ea 90 ℃ ± 2 ℃) | 1mm | KV/mm | ≥14.2 | |
| 2mm | ≥11.8 | ||||
| 3mm | ≥10.2 | ||||
| 10 | Matla a ho senya a tšoanang (ka oli ea 90 ℃ ± 2 ℃) | KV | ≥35 | ||
| 11 | Dielectric dissiption factor (50Hz) | - | ≤0.04 | ||
| 12 | Khanyetso ea Insulation | Tloaelehileng | Ω | ≥5.0×1012 | |
| Ka mor'a ho koloba ka lihora tse 24 | ≥5.0×1010 | ||||
| 13 | Combustibility (UL-94) | Boemo | V-0 | ||
